Maple GUARD LOCKSMITH HAMILTON
Call
Locksmith Service

Deadbolt Installation

Most Hamilton homeowners don't think about their deadbolt until something goes wrong — a key that no longer turns smoothly, a lock that's been compromised after a break-in attempt, or a new home on Garth Street where the previous owner's keys are still out in the world. At Maple Guard Locksmith Hamilton, we supply and install deadbolts across the Hamilton area every day, bringing the hardware, the tools, and the know-how directly to your door — no trip to a big-box store, no waiting for a contractor.

Call (289) 512-9870Get a fast quote

Open 24 hours, 7 days a week · Licensed, bonded & insured

Whether you're securing a detached home in Ancaster, a rental unit near McMaster University, or a century-old semi-detached in Kirkendall, the right deadbolt makes a measurable difference to your security. Our trained, insured technicians assess your door prep, recommend the best-fit hardware from trusted brands like Schlage and Kwikset, and complete every deadbolt installation with a clean, damage-free finish. We're mobile and available 24/7 — call (289) 512-9870 and we'll come to you.

What we do

Available 24/7

Day, night, weekends and holidays — a real local locksmith answers and rolls a fully-stocked van.

Fast local response

Based in Hamilton, we reach the Hamilton area in well under an hour.

Insured & background-checked

Vetted technicians, up-front pricing, and no surprise add-ons when we arrive.

Damage-free entry

We pick and bypass locks the right way, so most lockouts are solved without drilling anything.

01

Professional Deadbolt Installation for Hamilton Homes

A deadbolt is only as strong as its installation. A bolt that's even slightly misaligned with the strike plate, or set into a door with an undersized bore hole, can be defeated far more easily than one that's properly fitted. That's why Maple Guard's approach to deadbolt installation goes beyond simply inserting hardware into an existing hole. Our technicians measure door thickness, check the door-frame condition, verify the backset, and test the throw of the bolt before calling a job complete. Where older Hamilton homes have soft or weathered door frames — common in the older stock around Durand and the North End — we reinforce strike plates with longer screws that anchor into the structural stud, not just the trim.

We carry a working stock of single-cylinder, double-cylinder, and keypad deadbolts on every service vehicle, so most installations are completed in a single visit. If your situation calls for a grade-1 deadbolt, a smart-lock deadbolt with Wi-Fi integration, or a heavy-duty model for a side or rear door, we'll walk you through the options on-site before any work begins. You'll receive a confirmed, up-front price that accounts for the lock grade selected, any door prep required, the time of day, and travel distance — no surprises on the invoice.

02

Mortise Lock and Jimmy Proof Deadbolt Installation: Going Beyond the Standard Cylinder

Not every door is suited to a standard cylindrical deadbolt. Older Hamilton properties — particularly Victorian and Edwardian-era homes in Strathcona or along King William Street — were often built with mortise lock hardware, where the lock body sits recessed inside a pocket cut into the door's edge. A mortise lock provides exceptional resistance to kick-in attacks and generally offers a more elegant fit on period doors with narrow stiles. Our technicians are experienced in full mortise lock supply and installation, including cutting or cleaning out the mortise pocket, installing the lock case, and fitting the correct cylinder and trim plate to match your door's existing hardware profile.

For apartment-style doors, steel security doors, or any door that swings outward, a jimmy proof deadbolt installation is often the right call. This rim-mounted lock interlocks with the strike rather than throwing a bolt into it, making it highly resistant to the prying and shimming attacks that cylindrical deadbolts can be vulnerable to. It's a popular choice for basement suites and rear-entry doors throughout Hamilton's older housing stock. Whatever the door type, Maple Guard can assess which lock format will give you the best mechanical security for that specific opening.

03

Emergency Locksmith, Door Knob Lock, and Commercial Deadbolt Services Across Hamilton

Security needs don't follow business hours, and neither do we. As a 24/7 emergency locksmith service, Maple Guard responds to deadbolt failures, break-in damage, and urgent lock replacement calls at any hour — whether you're dealing with a kicked-in door at 2 a.m. in Crown Point or a failed lock on a commercial property on Barton Street. Emergency response calls are factored into pricing transparently: after-hours service, travel distance, and parts required are all quoted up front so you know the cost before we start.

Beyond residential deadbolts, we routinely handle door knob lock replacement and upgrades as part of the same visit — many Hamilton homeowners find that pairing a new deadbolt with a matching entry knob or lever set raises the security of the entire door assembly, not just the bolt. For commercial clients — retail units, offices, small warehouses — our commercial locksmith services include heavy-duty deadbolts, keypad access control deadbolts, and master-key system integration. If you manage multiple rental properties in Hamilton, we can key multiple locks alike or set up a master-key hierarchy so you're not carrying a different key for every unit. Call (289) 512-9870 — we answer 24/7.

04

What's Included: Our Deadbolt Installation Services at a Glance

Every service call with Maple Guard is handled by a trained, insured mobile technician who arrives stocked with hardware and tools. Below is a representative list of what we supply and install for Hamilton homes and businesses:

1. Single-cylinder deadbolt supply and installation — 2. Double-cylinder (keyed both sides) deadbolt installation — 3. Keypad and smart deadbolt installation and programming — 4. Mortise lock supply, pocket preparation, and full installation — 5. Jimmy proof deadbolt installation on steel and wood doors — 6. Door knob lock replacement paired with new deadbolt — 7. Lever-handle lock replacement and upgrade — 8. Strike plate reinforcement with structural-length screws — 9. Door-frame repair and reinforcement prior to new lock fitting — 10. Bore-hole resizing and patching for non-standard door prep — 11. Re-keying of existing deadbolts after a move or key loss — 12. Master-key system setup for multi-unit residential properties — 13. Commercial deadbolt installation on office and retail doors — 14. Grade-1 high-security deadbolt installation (Schlage B-series, Kwikset 980, and equivalents) — 15. Double-door and French-door deadbolt installation — 16. Sliding-door auxiliary deadbolt installation — 17. Patio door lock upgrade and deadbolt addition — 18. Garage-entry door deadbolt installation — 19. Basement and side-door deadbolt upgrade — 20. Smart-lock Wi-Fi deadbolt integration and app setup — 21. Keypad deadbolt battery and programming service — 22. Break-in damage assessment and emergency lock replacement — 23. Deadbolt inspection and security audit for existing doors — 24. Biometric and fingerprint deadbolt supply and installation — 25. Deadbolt installation on doors with non-standard thickness (steel, fibreglass, solid-core composite) — 26. Commercial keypad access control deadbolt with audit-trail capability — 27. Mailbox and storage-unit deadbolt fitting

Frequently asked questions

How does Maple Guard price a deadbolt installation job?

We quote every job up front before any work begins — there's no ambiguity on the final number. The factors that determine the price include the grade and type of lock selected (for example, a standard cylindrical deadbolt versus a mortise lock or a smart-lock deadbolt), whether door prep work such as reinforcing a strike plate or resizing a bore hole is needed, the time of day (after-hours and emergency calls reflect the 24/7 availability), and travel distance to your location in Hamilton or the surrounding area. Once we've assessed your door on-site, we give you a fixed price before we pick up a single tool.

Will you damage my door during the installation?

Our goal on every job is a damage-free installation. For standard cylindrical deadbolt installations, no new drilling is needed in most cases — we work with the existing bore hole and door prep. Where a mortise lock installation is required, we cut or clean out the mortise pocket precisely to fit the lock case, keeping the surrounding door material intact. If your door frame needs reinforcement or your bore hole requires adjustment, we'll discuss the scope of that work and how it will look when finished before we begin.

What's the difference between a jimmy proof deadbolt and a standard deadbolt?

A standard cylindrical deadbolt throws a bolt horizontally into a strike plate recessed in the door frame. A jimmy proof deadbolt is a rim-mounted lock where the bolt and strike interlock vertically, meaning a pry bar inserted between the door and frame has very little mechanical advantage against it. This makes jimmy proof deadbolt installation particularly well-suited to outward-swinging doors, steel security doors, and apartment doors where the door gap could otherwise be exploited. Our technicians can assess your specific door and recommend which type offers the better security profile for that opening.

Can you install a deadbolt on an older Hamilton home with a non-standard door?

Absolutely. Hamilton's housing stock includes a wide range of door ages and construction types — from solid-wood Victorian doors in Durand to steel-clad entry doors in newer Waterdown subdivisions. Our mobile technicians carry hardware and tools for non-standard door thicknesses, narrow stile doors that require a mortise lock rather than a cylindrical deadbolt, fibreglass doors, and doors with unusual backset measurements. If your door has a quirk, we've almost certainly encountered it before.

Can I get a deadbolt installed the same day I call?

Yes — same-day service is standard for us, not an upsell. Because Maple Guard operates as a 24/7 mobile locksmith, our technicians carry a stock of deadbolts and installation hardware on every vehicle. For most residential installations in Hamilton, we can arrive, assess, quote, and complete the job in a single visit. If you have a specific brand or grade preference, call ahead at (289) 512-9870 so we can confirm the right hardware is on the truck before we head out.

Do you also re-key existing deadbolts, or only install new ones?

We do both. If your current deadbolt is in good mechanical condition — no wear, no damage — re-keying it is a practical way to invalidate old keys without replacing the entire lock. This is common after a move, a tenant change, or a lost-key situation. If the lock is worn, outdated, or was damaged in a break-in attempt, we'll recommend a full deadbolt installation with new hardware. In either case, you'll receive a clear recommendation and an up-front price before any work begins.

Locked out or need a lock fixed? We are on the way.

(289) 512-9870Get a fast quote